Manufacturer: Micromanipulator

SPECIFICATIONS
PLATEN
Accepts 8 or more magnetic or vacuum based manipulators
10 BNC strain reliefs
1 in. (25.4 mm) thick honeycomb construction for maximum stability
Top surface electrically grounded to white terminal at
rear of baseplate
Fine Lift Control
True planar vertical motion, convenient knob control
Resolution: 0.3 micron per degree revolution
Range: 0.5 in. (12.7 mm)
Fast Lift Control
Raises platen and microscope with adjustable microscope lift delay
Range: 1.35 in. (34.3 mm)
Three locking up positions
Resolution: 10:1 reduction (handle:platen)


X•Y STAGE
Stage Movement
Range of motion 4 in. x 4 in. (101.6 mm x 101.6 mm)
Movement and vacuum stage planarity permanently set
at factory
Theta rotation control full 360° with conveniently located
locking knob
Control knobs coaxial X-Y for single hand operation from
either side, located center front
Resolution of X-Y movement: 1.8 microns per degree
revolution
Optional two-speed motorized stage drive for rapid wafer
scanning
Vacuum Stage
Standard 4 in. (101.6 mm) diameter with dual tweezer
slots
Gold plated brass for low contact resistance
Flatness t.0005 in. (t 12 microns)
Electrical isolation exceeds 5000 megohms at 500VDC
Electrically connected to black terminal at rear of
baseplate
OPTIONAL SOCKET STAGE
Conversion time vacuum to socket and back to vacuum
stage less than 60 seconds
Accepts P.C. cards with ZIF sockets for probing packaged devices while operating
Locking handle for theta rotation control
MICROSCOPE AND POST
Vertical positioning +1.4 in. ( support)
Vertical motion 0 -1.35 in. (34.3 mm) by platen fast lift
handle or fine control knob with adjustable delay
X-Y translation: 1 in. x 1 in. (25.4 mm x 25.4 mm) with
convenient knob control
Factory planarized X-Y translation
Coarselfine focus control
Microscope
B&L MicroZoom° with 2:1 zoom in body
3 long working distance objectives (2.25X, 8X, 25X)
Quadruple nosepiece accepts optional 50X objective
Trinocular head with camera port, 10X eyepieces
Coaxial illuminator with system mounted transformer and
infinite rheostat control
Optional
to 1,000X with optional objectives 2X to 50X, zoom control,
10X eyepieces. Includes trinocular head and quadruple nosepiece
DIMENSIONS AND FINISH
Size
20 in. (51 cm) wide x 18 in. (46 cm) deep x 24 in. (61 cm)
high with optics
Finish
Grained black anodized aluminum for long life
Weight
85 lbs. (38.5 kg)

JM Industries is selling this item in good condition and fully operational. The refurbished MICROMANIPULATOR 6000 comes with a 30 day warranty. (extended warranties are available for an additional cost).

If you purchase the MICROMANIPULATOR 6000, JMI will fully test the item. In many cases JMI will also run your product with the MICROMANIPULATOR 6000 to minimize your set up time. (just ask).

Buy the MICROMANIPULATOR 6000 direct and avoid broker commissions.

Email us for more photos of the guaranteed MICROMANIPULATOR 6000. Feel free to call us with any questions regarding the machine in stock. Also contact JMI to learn about options that may be available for this item.

If there are any special details that are critical on the MICROMANIPULATOR 6000 for your process, please let us know so we can be sure it meets your needs.

J.M. Industries offers support for many other machines, like the MICROMANIPULATOR 6000, even after the OEM (Original Equipment Manufacturer) discontinues offering parts or service.

Please inspect all shock watch indications when you receive the MICROMANIPULATOR 6000 from J.M. Industries before signing the bill of lading to ensure the MICROMANIPULATOR 6000 has been delivered in the same good condition it was shipped.

If would would like to see an emailed video of the MICROMANIPULATOR 6000 you have purchased in operation prior to shipment, please let us know. Please note: We may need a deposit prior to sending a video of the MICROMANIPULATOR 6000 to cover techncian costs.