The MP 1008 analytical prober features an 8-inch diameter,
electroless nickel-plated vacuum chuck that is designed to accept hot and cold temperature controlled chucks.
Unique to the MP 1008 is a XY-adjustable microscope mount that permits travel to-
ward the operator in excess of 3.5 inches and side-to-side sweep,
enabling the scanning of a 4-inch x 4-inch inch wide hybrid substrate without moving the substrate.
Â· 8-inch wafer capability
Â· Rigid base casting
The MP 1008, manual prober for 8-inch wafers, is
Â· Precise XYZ control and fine
a versatile and economical solution for general di-
engineering test and failure
analysis of microcircuits.
Featuring precision XY
stage motion and micrometer control of the probing platform,
the MP 1008 may be used with both
4.5-inch and 6-inch wide probe cards,
in some instances simultaneously if required.
PVX 400 series probe head assemblies for the MP
1008 enable three dimensional recirculating linear
bearing adjustment for probing 3-micron to 5-
Â· Optional universal probe card holder
Â· Sophisticated optics
Â· A full range of accessories including
Probe Platform Movement:
Coarse lift 12.5mm hand operated lever and cam fine lift; 9mm micrometer control
Probe Card Holder: Mounted to underside of probe platform;
(option) clear for manual probes as well as providing
the means to mount a fixed point probe card;
the cardholder is capable of accepting both
4.5in- and 6in- wide probe cards
Manually driven by (2) coaxially-mounted
travel X Y = 8in x 8in
Cast aluminum; forward and aft travel and
side swivel scans a 4.5in diameter area
8in diameter nickel-plated, electrically
Isolated to 3kV, electrical contact interwired to
vacuum hold down
X = 0.2in, Y = 0.2in, Z = 0.2in
Z Height Adjustment:
1.5in at probe tip
From 1g to fully locked
Linear Motion: In all axes
All specifications are subject to change without notice.
Rev 2.0 (5/3/01)
Please note: JMI has thousands of machines in stock and the photo of the item taken at our facility is for reference. There may be multiple models of this item in stock. JMI will email a video of any machine purchased under payment terms agreed, demonstrating operation (prior to shipment) at your request.
JMI has been selling refurbished semiconductor manufacturing equipment for over 40 years. Experienced technicians and a vast inventory of machines and parts enables JMI to offer support on the majority of tools we sell….for many years after the Original equipment manufacturer (OEM) does not.
Many tools are also listed on ebay if you prefer to purchase online immediately.
To avoid Ebay commissions, you can also place most machines on hold immediately by calling or texting J on his cell phone (978) 771-0481.