Manufacturer: Alcatel

Specifications
Model: 2008A
Stages: 2
Free air displacement cfm/(1/min): 7 (195)
Ultimate vacuum (partial pressure measurement), mbar: <10-4
Water vapor @ 30°C, grams/hr: 100
Oil capacity,qt/(I) : 1.06 (1.0)
Motor hp: 1/2
Motor speed, rpm (nom): 1725
Inlet ports: PNEUROP flange, NW25; alum tube 1.0-in. (25.4-mm) OD.
NW40 (1.75-in. (44.45mm) OD) optional
Outlet ports: PNEUROP flange NW25; alum tube 1.0-in. (25.4-mm) OD

JM Industries is selling this item in good condition and fully operational. The refurbished ALCATEL 2008A comes with a 30 day warranty. (extended warranties are available for an additional cost).

If you purchase the ALCATEL 2008A, JMI will fully test the item. In many cases JMI will also run your product with the ALCATEL 2008A to minimize your set up time. (just ask).

Buy the ALCATEL 2008A direct and avoid broker commissions.

Email us for more photos of the guaranteed ALCATEL 2008A. Feel free to call us with any questions regarding the machine in stock. Also contact JMI to learn about options that may be available for this item.

If there are any special details that are critical on the ALCATEL 2008A for your process, please let us know so we can be sure it meets your needs.

J.M. Industries offers support for many other machines, like the ALCATEL 2008A, even after the OEM (Original Equipment Manufacturer) discontinues offering parts or service.

Please inspect all shock watch indications when you receive the ALCATEL 2008A from J.M. Industries before signing the bill of lading to ensure the ALCATEL 2008A has been delivered in the same good condition it was shipped.

If would would like to see an emailed video of the ALCATEL 2008A you have purchased in operation prior to shipment, please let us know. Please note: We may need a deposit prior to sending a video of the ALCATEL 2008A to cover techncian costs.

About JMI Vacuum Pumps

J.M. Industries is one of the few dealers of semiconductor equipment
that performs vacuum pump rebuilding services on the ALCATEL 2008A at
our facility.

With over 250 pumps in stock, in most cases we can also sell a rebuilt ALCATEL 2008A,
or equivalent model and ship faster than any other source.

You can avoid downtime waiting for your purchasing department to approve the
purchase of a ALCATEL 2008A by calling in credit cards M/C or Visa.

J.M. Industries can rebuild the ALCATEL 2008A for use with many different vacuum oils.
Hydrocarbon oil is standard, but if your ALCATEL 2008A will be subject to corrosive processes,
just ask us to upgrade your oil to Technical White for a small additional cost. If your application requires
the use of explosive gases, your ALCATEL 2008A can be rebuilt and be prepped KRYTOX or
FOMBLIN oil for an additional fee.


Power Saving Upgrade
JMI now offers power saving upgrades to the ALCATEL 2008A
We will install new motors with programmable motor speed controllers.

We can also install a new vacuum gage to change speed of the ALCATEL 2008A
automatically if the tool the pump is connected to does not have a output to control
the pump speed.